Tag Archives: plug-in nut

Don’t lose your license

THE GUY I BOUGHT the car from removed the license plate. I drove home w/o one. I was passed at one point by a police car, so it’s clearly not a big thing. Unfortunately, the guy kept the screws that hold the plate in place. I stopped at a car parts place on the way to register the car a couple days later. The screws were the wrong size. I stopped at a different place. Google to the rescue.

The frame has come loose on the left side. It could easily fall off.

A few days later I went through the car wash. The license plate was half off the car! Closing the lift gate or going through a car wash was enough to cause the left half of the plate holder to fall free. This became the first repair.

New part from BMW, torx screws from the license plate, the torx driver, and a phillips head screwdriver. All you need.

This was a five-minute job including washing the part of the lift gate covered by the license plate. The license plate is attached to a frame with four screws. The frame is attached to the lift gate with two screws that go into plastic plugs. The left most plug was worn/damaged enough not to stay snapped into the sheet metal. Perhaps this has been a problem for BMW, the new part is a big chunkier than the old one. I reinstalled the frame and reattached the license plate. Now it’s time to hit the carwash!

New part on the left, old on the right – called a plug-in nut.

The part is called a “plug-in nut” and has BMW part number 51188242693.